AirPower AP60-5S Product Specifcation

PCB Size	55mm x29mm
Continuous Current	60A
Max Current for 15s	75A
Voltage Input	5.6V ~ 23.0V
Number of feeding Li-xx Cells	2 ~ 5 ( No BEC Mode MAX. 6S )
Number of feeding Ni-xx Cells	5 ~ 15
BEC Output	3A ( Built-In Swith Mode )
Weight	38g ( including cables )

★ These parts are all included.

• Max. RPM  
   For 2-pole motors : 210,000RPM  
   For 6-pole motors : 70,000RPM  
   For 12-pole motors : 35,000RPM  
• Built-in Switch Mode BEC 
   With this built in switch mode BEC, the input  voltage range is  5.6V to 23V, 
   that means you can use up to 5s lithium battery or  5 -15 Cells NiMH/NiCd. 
   At the same time, the effiency of BEC is highly increased, the BEC output is
   up to continuous 3 A, so this 3A BEC is best for RC helicopter & big aircraft.
• Safety Arming Feature
   Regardless the Throttle Stick position, the motor will not spin after battery
   connected. This will prevent any injury happened.
• Throttle Calibration  
   Throttle range can be configured to provide best throttling linearity,
   fully compatible with all market available transmitters.
• Programmable Items
-  Brake Settings：brake enabled / brake disabled, default is brake disabled
-  Battery Type：Li-xx(Li-ion or Li-poly) / Ni-xx(NiMh or Nicd)，default is Li-xx.
-  Low Voltage Protection Mode(Cutoff Mode) ：power reducing / power cutoff,
   default is power reducing.
-  Low Voltage Protection Threshold(Cutoff Threshold) ：low / medium / high,
   default is medium cutoff voltage.