You are here » Catalog » SPEED CONTROLLERS » HV-85
Castle Phoenix HV-85 Brushless Motor Control
Print product data sheet
Price : USD$ 209.95
Price : USD$ 178.46
Model : HV-85
Manufacturer : Castle Creations
Shipping Weight : 0.00 g.
Quantity :
Product Information
The Phoenix HV-85 has the power handling capability for just about anything you can put into the sky! With a total ability of over 4,000 watts (that's 5 horsepower!), The Phoenix HV-85 is right at home in all quarter and giant scale fixed wing aircraft, and large helicopters alike. Our factory pilot Dan Landis has one as his secret weapon for this season's FAI pattern competition, including the Nats in Muncie. Compare the price, size, and capability of the Phoenix HV-85 to the competition, and you'll understand the Castle Creations advantage. Top competition F3A, giant scale aerobatics, and large helicopters - The Phoenix HV-85 does it all, and keeps it's cool while flowing the power !


Specs

Volts w/BECNo BEC
Volts NO BEC50 MAX
Lipo Cells w/BECNo BEC
Lipo Cells NO BEC12S MAX
NiCad or NiMh Cells w/BECNo BEC
NiCad or NiMh Cells NO BEC36 MAX
BECNone (dual opto-coupled)
Continuous85 amps
Minimum Cells12 cells NiMH/NiCad or 4s LiPo
Switching RateProgrammable
(13, 26, or 52KHz)
Resistance0.0015 ohms
BrakeProgrammable
ReversibleYes - change any two wires
Low Voltage
Cut-off
Programmable
Size1.55 x 2.8 x 1.0"
Weight
(w/wires)
4.2 oz. (119g)
Connector TypeUniversal

All Phoenix HV speed controls feature:
  • Safe "Power On"
  • Microprocessor Controlled
  • Tough surface mount construction
  • Audible Arming Signal
  • Auto Motor cut-off with reset
  • Low torque "Soft Start": protects gear boxes and belt drives from shock
  • Smooth reverse exponential throttle
  • Self-calibrating endpoints: maximizes usable stick travel
  • Auto shut-down when signal is lost
  • Simple setup: no complicated switches or wiring

For NeuMotor's 11XX, 15XX and 22XX series of motors are all 4 pole designs. 19XX  series are 8 poles and the 44XX series are 12 poles. Use low or medium advance settings for “Y” wind motors and low advance settings for “D” wind versions.

Author: Visitor 17.07.2015
Evaluation:TEXT_OF_5_STARS


Author: Visitor 25.07.2013
Evaluation:TEXT_OF_5_STARS


Author: Visitor 28.06.2013
Evaluation:TEXT_OF_5_STARS


Author: Visitor 29.05.2013
Evaluation:TEXT_OF_5_STARS


Author: Visitor 30.04.2013
Evaluation:TEXT_OF_5_STARS


Write Evaluation

This Product was added to our catalog on Monday, 04. December 2006.



Customers who bought this product bought also the following products':

Deans -> Battery series charge 16AWG

USD$ 4.00
1 x 'Deans -> Battery series charge 16AWG' order
enLipo 4000mAh 3S 25C

USD$ 60.00
1 x 'enLipo 4000mAh 3S 25C' order
AirPac F-16 EDF for 90mm EDF

USD$ 348.00
USD$ 300.00
1 x 'AirPac F-16 EDF for 90mm EDF' order
Carbon Fiber Streamline Cones

USD$ 14.00
1 x 'Carbon Fiber Streamline Cones' order
AirPower 6mm Cab end & Bearing Link Hardwares

USD$ 18.95
1 x 'AirPower 6mm Cab end & Bearing Link Hardwares' order
AP-900DF Outrunner Motor Edition (Completion)
Technical Data :
- Weight : 335g (Include Motor)
- Motor Shaft : 5mm - Rotor Shaft : 8mm
- Thrust : 1.85 ~ 2.1 Kg  (4.07 ~ 4.62 lb)
Recommend :
Battery : Li-Po-(Max 6S)
22.2V-3700~5000mAh - 20C
Speed Control :
55A~65A - Castle HV-85 or Any 6 cell controller

USD$ 123.95
1 x 'AP-900DF Outrunner Motor Edition (Completion)' order
Cylinder for Airbrake 63mm(2 1/2")

USD$ 19.50
USD$ 14.50
1 x 'Cylinder for Airbrake 63mm(2 1/2")' order
Air Power Brake Valve

USD$ 14.95
1 x 'Air Power Brake Valve' order

SHIPPING POLICY | RETURNS POLICY | CONTACT US | PRIVACY POLICY
Copyright c 2006 AirPac Models. All Rights Reserevd.